1. Get a new 8 GIG SD card (or erase an old one)
2. Download the latest NOOBS off Raspberry Pi’s web site.
3. Copy the files to the SD card.
4. Boot up the Pi
5. Use the raspi-config program to
a) turn on SSH,
b) set sound output to either HDMI or the sound output jack, depending on how your monitor is connected.
c) Enable boot to Desktop
d) Change the Host name and user password, as you like. Leave all the other things alone.
a) set WiFi to your Router and enter your password, if you are not using ethernet.
5. In the Terminal:
sudo apt-get update && sudo apt-get upgrade
Reboot the Pi.
6. In the terminal
wget appleii.ivanx.com/a2cloud/setup; source setup
Hot tip: view this web page on the PI, select line above, click the middle mouse button, open a terminal window, and click the middle mouse button to paste it in.
It will take about an hour to load, depending on how good your Internet connection is.
7. In the terminal type:
Answer” y “to all questions.
8. In the terminal type
If you get “segmentation fault”, This is a known bug. It is due to a library not being installed. Fix this later.
9. In the terminal type
for a list of commands.
Connect your Apple II to the Raspberry Pi via a USB to serial adaptor (costs £2 from China, see Amazon).
Connect this up, and type:
You will see.
Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Copy and paste the following line to Amazon, to get your £2 adapter.USB To RS232 Serial Db9 Adapter Female Screw For Win7 Window7 64 PL2303
There are more expensive adapters. This one is the cheapest. It has drivers for Mac OS X and Windows on a little disk. Put this disk in your laptop and copy the files to a USB stick. The drivers for Linux don’t work on the Raspberry Pi, but you don’t need them anyway.